End of Lease Carpet Steam Cleaning Guide

Steps To Clean Your Carpets Effectively

Moving out carpet cleaning


Your lease agreement includes a termination clause that needs you to repair and clean out the house in readiness for the next tenant. One of the most common sections that need thorough cleaning would be the floor, especially if the entire floor was covered with a carpet. You can either clean alone or simply hand over this job to the experts like NO1 Carpet Cleaning Melbourne , if you don’t have the luxury of  time.

What is the end-of-lease cleaning?

Some people do not know what this entails when they are signing their lease agreement. At the end of your lease, for you to receive the rental bond, you need to get the house in the same condition you found it. The cleaning involves scrubbing and scraping every inch of the house, especially in

  • Kitchen counters
  • Stove tops
  • Toilet and bathrooms
  • Carpets and ceiling

This may even involve painting and even repairing damaged sections of the house.

Steam cleaning is one of the most preferred options by real estate agents for cleaning the carpet. This process involves using both chemicals and water to get rid of stains and dirt from the carpet. The application of hot water in this cleaning process makes it the best option as it allows you to clean not only the surface but dirt and grime that are stuck inside the carpet. Before you can successfully vacate the premises, a real estate agent may visit the home to ascertain the house is back in its glory form.

RTA has stated that a property manager or owner cannot force the tenant to engage with a carpet cleaning service. Hence, if you want to save money here are few steps you can follow in cleaning your carpets effectively.

Steam Carpet Cleaning Easy Steps 

Easy To Follow Carpet Cleaning Steps

Step 1. Clear the house

This is the first step in your preparations. You need to empty the entire house. Remove all the furniture, fittings, and even toys. Most steam cleaning equipment involves a lot of pulling and pushing. The presence of obstacles could greatly hamper the effectiveness of the exercise.

Step 2. Vacuum the carpet

Before cleaning, you need to vacuum the entire house at least twice. This helps you to get rid of

  • Loose dirt
  • Crumbs
  • Dust particles
  • Hair

This cleaning process works by dissolving stains to restore the carpet. It may be difficult to remove the dirt lodged deep inside the carpet fibers.

Step 3. Treat spot stains before steaming

Spots resulting from food smudges, animal urine, and even cosmetics can leave a nasty stain. Blot a piece of cloth with the stain removal solution and dab on the spot till it soaks on the stain treatment solution, then allow it to rest for a few minutes before starting to clean.

Step 4. Prepare the carpet steam cleaner

Fill the machine with clean water as directed by its manufacturer. Then add a cleaning solution and white vinegar into the water tank. Be careful not to add what is not recommended into the tank, as most manufacturers prefer adding only water for steaming into the tank. Some manufacturers have fitted their machines with a detergent compartment. If you do not have one, you can add the detergent to the water tank.

Fix the water tank back on the machine, plug it into a power source, and let the water heat up to a steaming temperature.

Step 5. Run the steam cleaner on the carpet

Map out your cleaning process and run the machine over the carpet from one end to another, following a straight line through each run. You can overlap previous lines when doing a second run to ensure you cover all the dirty spots. It is best to start with corners far from the door to make it easier to move from one room to another without stepping on clean sections.

Step 6. Allow the Carpet to dry

Most steam cleaning machines are designed to leave behind very little water or moisture. Give your carpet a time range of 4 to 12 hours to dry completely. If you are in a hurry, you can use a vacuum cleaner that has both dry and wet features to dry it. Some people may prefer central dehumidifiers for better results.

These are the basic steps that every realtor expects you to take when steaming your carpet at the end of your lease. Many times following to these steps have yielded some of the best results when it comes to carpet cleaning. You do not need your lease to expire before you can steam clean your carpet. Regularly clean your carpet to avoid the accumulation of dirt and grime that becomes a headache when cleaning at the end of your lease.